Top Quality Stepper Motor Linear - Nema 11 (28mm) linear actuator – Thinker
Top Quality Stepper Motor Linear - Nema 11 (28mm) linear actuator – Thinker Detail:
>> Short Descriptions
Motor Type | Bipolar stepper |
Step Angle | 1.8° |
Voltage (V) | 2.1 / 3.7 |
Current (A) | 1 |
Resistance (Ohms) | 2.1 / 3.7 |
Inductance (mH) | 1.5 / 2.3 |
Lead Wires | 4 |
Motor Length (mm) | 34 / 45 |
Stroke (mm) | 30 / 60 / 90 |
Ambient Temperature | -20℃ ~ +50℃ |
Temperature Rise | 80K Max. |
Dielectric Strength | 1mA Max. @ 500V, 1KHz, 1Sec. |
Insulation Resistance | 100MΩ Min. @500Vdc |
>> Descriptions
Performance
Maximum thrust up to 240kg, low temperature rise, low vibration, low noise, long life (up to 5 million cycles), and high positioning accuracy (up to ±0.005 mm)
Application
Medical diagnostic equipment, life science instruments, robots, optical equipment, analytical instruments, semiconductor equipment, communication equipment, automation equipment
>> Electrical Parameters
Motor Size |
Voltage/ Phase (V) |
Current/ Phase (A) |
Resistance/ Phase (Ω) |
Inductance/ Phase (mH) |
Number of Lead Wires |
Rotor Inertia (g.cm2) |
Motor Weight (g) |
Motor Length L (mm) |
28 |
2.1 |
1 |
2.1 |
1.5 |
4 |
9 |
120 |
34 |
28 |
3.7 |
1 |
3.7 |
2.3 |
4 |
13 |
180 |
45 |
>> Lead screw specifications and performance parameters
Diameter(mm) |
Lead(mm) |
Step(mm) |
Power off self-locking force(N) |
4.76 |
0.635 |
0.003175 |
100 |
4.76 |
1.27 |
0.00635 |
40 |
4.76 |
2.54 |
0.0127 |
10 |
4.76 |
5.08 |
0.0254 |
1 |
4.76 |
10.16 |
0.0508 |
0 |
Note: please contact us for more lead screw specifications.
>> MSXG28E2XX-X-1-4-S linear actuator outline drawing
Stroke S (mm) |
30 |
60 |
90 |
Dimension A (mm) |
80 |
110 |
140 |
Product detail pictures:
Related Product Guide:
We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Top Quality Stepper Motor Linear - Nema 11 (28mm) linear actuator – Thinker , The product will supply to all over the world, such as: Lithuania, Mecca, New York, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Roxanne from Vietnam - 2017.01.28 18:53
The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
By Emma from Florence - 2017.06.25 12:48