Factory Cheap Hot 3d Printer Closed Loop Stepper - Nema 11 (28mm) stepper motor – Thinker
Factory Cheap Hot 3d Printer Closed Loop Stepper - Nema 11 (28mm) stepper motor – Thinker Detail:
>> Short Descriptions
Motor Type | Bipolar stepper |
Step Angle | 1.8° |
Voltage (V) | 2.1 / 3.7 |
Current (A) | 1 |
Resistance (Ohms) | 2.1 / 3.7 |
Inductance (mH) | 1.5 / 2.3 |
Lead Wires | 4 |
Holding Torque (N.m) | 0.05 / 0.1 |
Motor Length (mm) | 34 / 45 |
Ambient Temperature | -20℃ ~ +50℃ |
Temperature Rise | 80K Max. |
Dielectric Strength | 1mA Max. @ 500V, 1KHz, 1Sec. |
Insulation Resistance | 100MΩ Min. @500Vdc |
>> Certifications
>> Electrical Parameters
Motor Size |
Voltage/ Phase (V) |
Current/ Phase (A) |
Resistance/ Phase (Ω) |
Inductance/ Phase (mH) |
Number of Lead Wires |
Rotor Inertia (g.cm2) |
Holding Torque (N.m) |
Motor Length L (mm) |
28 |
2.1 |
1 |
2.1 |
1.5 |
4 |
9 |
0.05 |
34 |
28 |
3.7 |
1 |
3.7 |
2.3 |
4 |
13 |
0.1 |
45 |
>> General technical parameters
Radial clearance |
0.02mm Max (450g load) |
Insulation resistance |
100MΩ @500VDC |
Axial clearance |
0.08mm Max (450g load) |
Dielectric strength |
500VAC, 1mA, 1s@1KHZ |
Max radial load |
20N (20mm from flange surface) |
Insulation class |
Class B (80K) |
Max axial load |
8N |
Ambient temperature |
-20℃ ~ +50℃ |
>> 28HS2XX-1-4A motor outline drawing
>> Torque-frequency curve
Test condition:
Chopper drive, half micro-stepping, drive voltage 24V
>> About us
We adhere to client 1st, top quality 1st, continuous improvement, mutual advantage and win-win principles. When cooperation together with the customer, we provide shoppers with the highest high-quality of service.
We have advanced production technology, and pursuit innovative in products. At the same time, the good service has enhanced the good reputation. We believe that as long as you understand our product, you must be willing to become partners with us. Looking forward to your inquiry.
Product detail pictures:

Related Product Guide:
Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for Factory Cheap Hot 3d Printer Closed Loop Stepper - Nema 11 (28mm) stepper motor – Thinker , The product will supply to all over the world, such as: Oman, Switzerland, United Arab Emirates, We believe with our consistently excellent service you can get the best performance and cost least products from us for a long term . We commit to provide better services and create more value to all our customers. Hope we can create a better future together.

The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
