China wholesale Size 42mm Closed-Loop Stepper Motor - Nema 8 (20mm) closed-loop stepper motors – Thinker
China wholesale Size 42mm Closed-Loop Stepper Motor - Nema 8 (20mm) closed-loop stepper motors – Thinker Detail:
>> Short Descriptions
Motor Type | Bipolar stepper |
Step Angle | 1.8° |
Voltage (V) | 2.5 / 4.3 |
Current (A) | 0.5 |
Resistance (Ohms) | 4.9 / 8.6 |
Inductance (mH) | 1.5 / 3.5 |
Lead Wires | 4 |
Holding Torque (N.m) | 0.015 / 0.03 |
Motor Length (mm) | 30 / 42 |
Encoder | 1000CPR |
Ambient Temperature | -20℃ ~ +50℃ |
Temperature Rise | 80K Max. |
Dielectric Strength | 1mA Max. @ 500V, 1KHz, 1Sec. |
Insulation Resistance | 100MΩ Min. @500Vdc |
>> Certifications
>> Electrical Parameters
Motor Size |
Voltage/ Phase (V) |
Current/ Phase (A) |
Resistance/ Phase (Ω) |
Inductance/ Phase (mH) |
Number of Lead Wires |
Rotor Inertia (g.cm2) |
Holding Torque (N.m) |
Motor Length L (mm) |
20 |
2.5 |
0.5 |
4.9 |
1.5 |
4 |
2 |
0.015 |
30 |
20 |
4.3 |
0.5 |
8.6 |
3.5 |
4 |
3.6 |
0.03 |
42 |
>> General technical parameters
Radial clearance |
0.02mm Max (450g load) |
Insulation resistance |
100MΩ @500VDC |
Axial clearance |
0.08mm Max (450g load) |
Dielectric strength |
500VAC, 1mA, 1s@1KHZ |
Max radial load |
15N (20mm from flange surface) |
Insulation class |
Class B (80K) |
Max axial load |
5N |
Ambient temperature |
-20℃ ~ +50℃ |
>> 20IHS2XX-0.5-4A motor outline drawing
Pin configuration (Single end) |
||
Pin |
Description |
Color |
1 |
GND |
Black |
2 |
Ch A+ |
White |
3 |
N/A |
White/Black |
4 |
Vcc |
Red |
5 |
Ch B+ |
Yellow |
6 |
N/A |
Yellow/Black |
7 |
Ch I+ |
Brown |
8 |
N/A |
Brown/Black |
Pin configuration (Differential) |
||
Pin |
Description |
Color |
1 |
GND |
Black |
2 |
Ch A+ |
White |
3 |
Ch A- |
White/Black |
4 |
Vcc |
Red |
5 |
Ch B+ |
Yellow |
6 |
Ch B- |
Yellow/Black |
7 |
Ch I+ |
Brown |
8 |
Ch I- |
Brown/Black |
>> About us
So that you can utilize the resource from the expanding info in international trade, we welcome shoppers from everywhere on-line and offline. In spite of the good quality solutions we offer, effective and satisfying consultation service is supplied by our specialist after-sale service team. Product lists and detailed parameters and any other info weil be sent to you timely for your inquiries. So please make contact with us by sending us emails or call us if you have any questions about our corporation. ou may also get our address info from our web page and come to our company to get a field survey of our merchandise. We are confident that we are going to share mutual achievement and create strong co-operation relations with our companions in this marketplace. We’re searching forward for your inquiries.
Product detail pictures:
Related Product Guide:
From the past few years, our firm absorbed and digested sophisticated technologies equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted into the growth of China wholesale Size 42mm Closed-Loop Stepper Motor - Nema 8 (20mm) closed-loop stepper motors – Thinker , The product will supply to all over the world, such as: Islamabad, Oman, Ghana, Be sure to feel cost-free to send us your specs and we are going to respond for you asap. We have got a experienced engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, please actually feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Kitty from Borussia Dortmund - 2017.04.28 15:45
This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
By Honorio from Jamaica - 2018.05.15 10:52